Dell EMC

Configure FX2 Chassis

Once you have racked your FX2 chassis: Provide power to both PSUs (Note that if your chassis has an 8 node specification then you may require IEC 19/20 ports rather than the traditional C13/14 (Kettle leads) on your PDUs: Connect a laptop to the on-board CMC port with a cross-over...
Dell EMC

Dell FX2 Overview & Setup for vSphere Environments

In this series of blog posts, I'll go through the base configuration required for the following scenario (Scroll down for links to the configurations) Configure FX2 chassis with dual FN2210S IO Modules to LAN & FC switches for Dell EMC VNX. *Note that these guides are not suitable for Dell EMC Unity and possibly other...